The NRF series Electronic Personal Dosimeter (EPD) is a suitable for detecting and monitoring radiation in the restricted areas of nuclear power stations and other nuclear facilities. The NRF-30 measures gamma and X-ray. An audible alarm activates if the dose or dose rate exceeds a preset value. The dose value detected by the EPD is sent to a Computer system through a Reader, to allow you to effectively manage personnel safety. Dose, dose rate and operating-time alarm values can be preset with setting device. The EPD can be easily calibrated with Calibrator. The technically advanced dosimeters of the NRF series and their accessories can be combined to effectively protect your personnel from dangerous levels of radiation under a wide range of conditions. Autonomous functions are limited. To operate this dosimeter, the NRZ IR Reader and Software is recommended.
Detector: Silicon semiconductor
Dose equivalent range:
(Sv) 0μSv to 999μSv
1.000mSv to 999.9mSv
1.000Sv to 9.999Sv
(rem) 0.0mrem to 999.9mrem
1.000rem to 999.9rem
Accuracy: ±10%(0.1mSv to 9.999Sv,137Cs)
Energy range: 30keV to 6MeV
Energy response: ±20%(50keV to 6MeV, 137Cs)
Angular response:
±20% (Up to ±60 degree, vertical and
horizontal, 137Cs)
±50% (Up to ±60 degree, vertical and
horizontal, 241Am)
±30% (All around horizontal, 137Cs, free air)
Linearity for wide range of dose rate:
±10%(0.1mSv/h to 9.999Sv/h,137Cs)
Display: LCD (With backlight)
Alarm volume: 85dB to 100dB (at a point 30cm away from the top of the buzzer)
Communication method: Infrared communication
Ambient temperature: - 20°C to +50°C
Ambient humidity: 35% to 95% Non condensing
Power supply: “CR123A” battery
Battery life: 1 year or more (when used for 8 hours a day)
or 4 months or more (when used for continuous monitoring)
Size: 60W x 78H x 27Dmm (excluding clip)
Mass: < 100g
NRF30 Dosimeter
For data-logging and changing settings, the NRZ Reader with Software is required.
