Moving Laser System for Patient Alignment
Used in Radiation Therapy
The Dorado-3 is ideal for precise patient marking, accurate planning and exact positioning. Patient marking takes place during CT simulation (virtual simulation) and is required for reproducible treatment positioning on the LINAC. The Dorado-3 Laser System consists of one ceiling and two wall post rails with fixed and movable red laser modules to mark the patient in all three body planes.
The Dorado-3 includes
- One ceiling rail with one movable laser for display of sagittal line and one fixed laser for display of transverse line
- Two wall/post rails, each with one movable laser to display the coronal lines and one fixed laser for display of transverse lines
- Cable set consists of power cords and data cable
- Wilke Phantom for quality assurance
Options, sold separately
- Support system for false ceilings
- Support system for floor mounted units
- Bridge design
Notes:
- 12 months standard warranty
- Installation not included
Dorado-3 Mounting Options
Dorado-3 Laser System Specifications
| System | ||
|---|---|---|
| Dimensions |
Wall Post Bridge |
1553 × 143 × 109.5 mm 1707.5 × 225 × 164 mm 2594-5000 mm x 2300-2800 mm |
| Weight |
Wall Post Bridge |
23 kg 24 kg approx. 100 kg |
| International Protection Rating | IP20 | |
| Operating temperature | 15 - 30°C | |
| Ambient conditions | 35 - 80 % relative humidity, non-condensing | |
| Travel range (ceiling) | 700 mm | |
| Travel speed (ceiling) | up to 200 mm/s | |
| Positioning accuracy | ± 0.1 mm | |
| Projection precision (ceiling) | ± 0.5 mm up to 4 m distance | |
| Laser | ||
| Laser color (typical wave length) | red (638 nm) | |
| Laser class | 2 | |
| Focusable range | 1 - 4 m | |
| Line length at 3 m distance | > 3 m | |
| Line width up to 4 m distance | < 1 mm | |
| Maximum laser output power | < 1 mW | |
| Power Supply | ||
| External power supply | 100 - 240 V AC, 50 - 60 Hz | |
| Internal voltage | 24 V D | |
| International Certifications | ISO-9001, ISO-13485 | |
